The Greens Care Collection (GCC) consists of three frames that attach directly to your existing triplex greens mower. Each frame has the ability to switch out from 13 different inserts. Each insert represents a different greens maintenance tool – making the GCC an all-inclusive product.
Fast & Easy Greens Care
Become more energy efficient with the collection that is fast and easy to use.
-
Quickly attach the GCC directly to your existing triplex – no training necessary
-
Change out each insert with ease – no tools needed
-
Don’t worry about clean-up – the True-Surface® vacuum effect efficiently throws debris into the grass baskets
-
Eliminate downtime because your greens are ready for play as soon as you drive off
Get the most out of the Greens Care Collection by collecting all the available inserts. There are 13 useful turf maintenance tools to choose from. You will be impressed how easily each insert can be switched in and out – so easy, you can even leave the hydraulic motor attached. Additionally, easy-to-use handles allow you to interchange each insert without safety risks!
True-Surface GCC attaches directly to your triplex greens mower.
Its interchangeable inserts make your greens care tasks FAST & EASY!
You will benefit from healthier greens when you incorporate the GCC into your maintenance program.
Quick Adjustments
Adjusting your inserts is easy too! Never lift a tool when you adjust them with the True-Surface® patented depth of cut adjuster. Simply dial-in you desired depth by using the easy-to-read depth gauge – each click equals .010 of an inch.
Vacu-Cutter™ – Stainless Steel
The Vacu-Cutter™ Insert is the ultimate de-thatching machine that removes and vacuums up 20 times more material than standard OEM verticutters. Its vacuum-power system shoots the material directly into the grass basket without additional clean-up. What a time and money saver!!
-
Usual Working Depth: 0-1/8” (0-3mm)
-
Maximum Working Depth: ¼” (6mm)
-
Blade Spacing: 3/8” (10mm)
-
Blade Type: 45 stainless steel blades per insert with 11 tungsten carbide tips on each.
Vacu-Cutter™ Inserts are available in 1 mm, 1.5 mm & 2 mm options!
32-Blade Vacu-Cutter™ – Stainless Steel
The 32-Blade Vacu-Cutter™ Insert is designed to give you more de-thatching options. Most standard verticutters use 45 blades, but if you are looking for a less aggressive de-thatcher, purchase the 32-Blade Vacu-Cutter. With more spacing between each blade, it provides a lighter option for vertticutting.
-
Usual Working Depth: 0-1/8” (0-3mm)
-
Maximum Working Depth: ¼” (6mm)
-
Blade Spacing: 3/5” (15mm)
-
Blade Type: 32 stainless steel blades per insert with 11 tungsten carbide tips on each.
Vacu-Cutter™ Inserts are available in 1 mm, 1.5 mm & 2 mm options!
Vacu-Groomer™
Everyone wants a nice even cut when they mow their greens. We suggest using the Vacu-Groomer™ Insert to stand up the grass prior to mowing to get the most even cut possible. Additionally, the Vacu-Groomer™ is an effective tool to remove poa annua seedheads.
-
Usual Working Depth: 0 – 3/32” (0-2mm)
-
Maximum Working Depth: 3/32” (2mm)
-
Blade Spacing: 3/8” (10mm)
-
Blade Type: 45 steel blades per insert with 2 tungsten carbide tips on each. Blade tips are offset so they can cut at ¼” (5mm).
Vacu-Scarifier™
For times when you need to cut in a little deeper you will need to utilise the Vacu-Scarifier™ Insert. The True-Surface® Vacu-Scarifier™ is a useful supplement to regular use of the Vacu-Cutter™. It removes large amounts of thatch and opens the surface for entry of air, sand topdressing, water, and pesticides – not only leaving your greens healthy, but also immediately ready for play.
-
Usual Working Depth: 5/16 – 3/8” (8-10mm)
-
Maximum Working Depth: 3/8” (10mm)
-
Blade Spacing: 1 ½” (40mm)
-
Blade Type: 12 Steel blades per insert with 5 tungsten carbide tips on each.
Vertical Mower
The NEWEST addition to the Greens Care Collection is the Vertical Mower Insert! It is equipped with a revolutionary blade that is especially useful with ultradwarf bermuda grasses. The True-Surface® Vertical Mower will thin out horizontal growth by cutting perpendicular to the solid surface. Insert is available with either 23-Blades & 44-Blades.
-
Usual Working Depth: 0-1/8” (0-3mm)
-
Maximum Working Depth: ¼” (6mm)
-
Blade Spacing: 1/2” (13mm)
-
Blade Type: 11-tip vertical cutting blade. Each Insert consists of 23 or 44 non-carbide tip blades, with a Rockwell C hardness of 55
Greens Spiker
Preparation is an important aspect to any turf maintenance program. With the Greens Spiker you are able to prep your greens for overseeding with only 2 or 3 passes – saving you time! The Greens Spiker uses its spikes to penetrate through the green’s surface to allow air and water entry. Also making it a great tool for venting during high humidity months!
-
Usual Working Depth: ¾” (20mm)
-
Maximum Working Depth: ½-1” (12-25mm) if ground conditions are soft enough
-
Spike Spacing: 2 3/8” (60mm) producing 344 holes per square yard or 400 holes per square meter
-
Spike Type: 55 hardened steel spikes 1 ¼” long
Star Slitter
The Star Slitter is used as a turf aerator tool. Use the Star Slitter Insert for a fast and easy way to aerate the surface of the green without disrupting it. It will leave the surface smooth and ready for play.
-
Usual Working Depth: ½ – ¾” (13-20mm)
-
Maximum Working Depth: ¾” (20mm)
-
Blade Spacing: 1 ½” (40mm)
-
Blade Type: 11 7-point spring steel blades per insert
Deep Slicer
Open your greens surface without removing any material! Use the Deep Slicer Insert to create deep continuous slits in the green to allow gas exchange, water penetration and stimulate root growth. The blades are designed to open the turf without removing material – leaving your greens immediately ready for play.
-
Usual Working Depth: ¾” (20mm)
-
Maximum Working Depth: ¾” (20mm)
-
Blade Spacing: 1 ½” (40mm)
-
Blade Type: 12 round cornered triangular blades with sharpened edges per insert; .03” (.7mm) thick
Vacu-Brush™ – Firm, Soft & Super Soft
We like to provide options for our customers, so we now 3 types of Vacu-Brushes™ available for different applications. Use the soft or the super soft brushes to remove dew, surface debris, and worm castings. Use firm brush to groom the turf, collect large debris, and remove poa annua seeds along with excess topdressing. To incorporate sand topdressing, remove your mower’s grass baskets and use the Vacu-Brush™ to work the sand into the canopy.
-
Usual Working Depth: 0 – Bristles should just lightly skim the top of the turf
-
Bristle Types: Firm, Soft or Super Soft Bristles
NV Roller – Non-Vibratory
Use the True-Surface® NV Roller Insert as a non-vibratory option to greens rolling at a lower cost. Greens rolling will help you gain green speeds, smooth the turf, and raise your mowing height of cut.
-
Roller Type: Non-vibratory greens roller
-
Roller Size: 5” (127mm) diameter; 1” (25.4mm) steel wall tube; 3” (76.2mm) diameter removable weight bar
-
Weight: 74 lbs (33.6 kg) per roller; additional 38 lbs (17.2 kg) removable weight bar
* The GCC frame adds 46 lbs (20.9 kg), with a total possible weight of 158 lbs (71.7 kg) per roller.